TCS Technical learning library

Avoiding Air Bubbles

Six ways to avoid air bubbles.

Read More >>

Choosing the Correct Type of Cartridge for Your Injection Machine

This video illustrates how to select the correct cartridge for your injection machine.

Read More >>

Create A Waxing Tool

To create a very smooth and natural contour, shape the eraser of a pencil into a wedge. Use the wedge in between teeth or nooks and crannies to achieve a natural festoon.

Read More >>

Design – Case 1

Very difficult case with major blockout needed and challenging path of insertion.
The forward-angled remaining teeth will make fitting the model challenging. Be patient when fitting and the model.

Read More >>

Design – Case 2

Video demonstrates the recommended design for this free end saddle.
Challenges arise with the angulation of the first molar.

Read More >>

Design – Case 3

An excellent example of when to prescribe Karadent™ by tcs®.

Read More >>

Design – Case 4

Design for a case with long free end saddles.
The angulation of the teeth present a challenge with path of insertion.

Read More >>

Design – Case 5

A good example of when a conservative blockout can give you more freedom in the fitting/finishing stage.

Read More >>

Design – Case 6

A story of a patient who was wearing an acrylic wire partial denture and switched to a TCS appliance.
A story of a Happy Patient.

Read More >>

Diatorics

Use TCS Twist Drills for diatorics.
Diatoric holes must be made in a “T” shape that connect in the middle.

Read More >>

EZ-Flow

A step by step to using the TCS EZ – Flow separator on Nylon based thermoplastics.

Read More >>

Fabricating Flexible Partial Dentures – the TCS Way

A step by step guide to fabricating flexible partial dentures. Ideal for those new to TCS or those who need a quick refresher.

Read More >>

Finishing and Polishing Ebook

In this eBook, TCS walks you through the most effective way to finish and polish TCS appliances.

Read More >>

Finishing Part 1

Use the Econo Cutter to remove sprues. The Rubberized Abrasive Wheel to trim edges.

Read More >>

Finishing Part 2

Use a TCS Pink Grinding Wheel to detail the partial.

Read More >>

Finishing Part 3

Use a mini Pink Grinding Wheel to detail the TCS appliance.

Read More >>

Finishing Part 4

Use a Pink Zirconia Bur or a Carbide Bur to gradually fit the partial for accurate retention.
Clasp adjustment tips included.

Read More >>

Finishing Part 5

Use a Brown Rubber Wheel to rubberize the entire TCS partial. This is a crucial step for achieving a high shine in the polishing stage.
Use a TCS Mini Fuzz Buff to further smoothen the partial for an enhanced polish.

Read More >>

Fixing Air Bubbles

This video illustrates a simple way to get rid of air bubbles that often occur when fabricating flexible partials.

Read More >>

Frequently Asked Questions About Karadent™

Frequently asked questions about Karadent™.

Read More >>

Frequently Asked Questions About TCS Resins

Frequently asked questions about the TCS resins.

Read More >>

How To Care For TCS Appliances

Short video on how to care for TCS appliances using the TCS Concentrated Dental Appliance Cleaner.

Read More >>

Hydraulic Injector Instructional Manual

The most popular of TCS injection units. Learn how to simple it is to use the TCS Hydraulic Injector.

Read More >>

iFlex™ & Unbreakable™ Repair

A step by step guide for repairing iFlex™ and Unbreakable™ flexible partial dentures.

Read More >>

Injecting TCS with The Success Unit by Dentsply

This video illustrates how to inject TCS cartridges using the Success Unit by Dentsply.

Read More >>

Karadent™ with Acrylic

An overview on how to fabricate a Karadent™ clear framework with acrylic saddles.

Read More >>

Lingual Wax Application

Cutting an opening on the palate wax pattern allows the wax to bend for easier application.

Read More >>

Manual Injector Instructional Manual

TCS’s most economical injection unit, the TCS Manual Injector. An overview video on its key characteristics and how to use.

Read More >>

Palate Wax Application

Use the thinner part of the lingual wax bar against the teeth.

Read More >>

Pumice with Turbo Buff

The TCS Turbo cuts pumicing time in half and lasts 5 times longer than Rag Buffs. Turbo Buffs are used only for pumicing.

Read More >>

Spruing 101

How to sprue correctly for clean and accurate injections.

Read More >>

TCS Automatic Injector Instructional Manual

TCS’s most economical injection unit, the TCS Manual Injector. An overview video on its key characteristics and how to use.

Read More >>

TCS Digital Furnace Instructional Manual

A reliable and low maintenance furnace used to inject thermoplastic resins. Learn more about the TCS Digital Furnace.

Read More >>

TCS Duplicating Unit – 2 Gallon Model

A no frills 2 gallon duplicating unit for value.

Read More >>

TCS JP90 Handheld Injector Instructional Manual

The only handheld injector in the market capable of injecting from 1-3 tooth unilaterals to 5 consecutive tooth partials/saddles. An overview video on its key characteristics and how to use.

Read More >>

Understanding Design 1

Following the Kennedy method, we will evaluate a case to determine the type of partial denture, design, and functionality that best suits the case. 

Read More >>

Understanding Design 2

Following the Kennedy method, we will evaluate a case to determine the type of partial denture, design, and functionality that best suits the case. 

Read More >>
My account
Tab #1
I am tab 1 content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Tab #2
I am tab 2 content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Tab #3
I am tab 3 content. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Header Column #1Header Column #2Header Column #3Header Column #3Header Column #3Header Column #3Header Column #3Header Column #3Header Column #3
Column #1Column #2Column #3
Column #1Column #2Column #3