
Finishing tools
The most ideal tools to finish TCS appliances with ease and prepare them for the polishing stage.
Visit our Technical Library for helpful tips & techniques.
Pink Zirconia burs are NEW and POPULAR tools designed to fit and adjust appliances.

Finishing Tools
Econo Cutter & Mandrel

4203-01, 4204-01
Use to cut off sprues from TCS restorations after injection.
Item Codes:
Econo Cutter 4203-01
Econo Mandrel 4204-01
White Knock Down Wheel

4211-01, 4212-01
One of the first steps in the finishing stage, cuts excess bulk and trims partial to the desired length.
Item Codes:
White Knock Down Wheel 4211-01
White Knock Down Chuck 4212-01
Rubberized Abrasives

4304-01(Thin), 4306-01(Thick)
Long-lasting wheel for smoothening the partial during the finishing stage.
Item Codes:
Thin 4304-01
Thick 4306-01
Pink Grinding Wheels

4205-01 100/box
Excellent and economical product for the finishing stage.
Item Code: 4205-01 100/box
Brown Rubber Wheels

4503-01 100/box
Use prior to pumicing in order to obtain a high shine. It is crucial that the entire partial is rubberized and smoothened.
Item Code: 4503-01 100/box.
Mini Fuzz Buff

4222-01 12 pcs
Use after the Brown Rubber Wheels to further smoothen the partial prior to pumicing.
Use a handpiece that can be regulated to 30,000 RPM or a lathe.
RPM= 25,000-30,000
Item Code: 4222-01 12 pcs.
Pink Zirconia Burs

5035Z(Fine), 5045Z(Coarse)
Item Codes:
Pink Zirconia Coarse Bur 5045Z
Use during the finishing stage to cut excess material and trim the appliance to the desired length. Ideal for gross reduction.
Use a handpiece that can be regulated to 30,000 RPM or a lathe.
RPM= 30,000Pink Zirconia Fine Bur 5035Z
Use during the finishing stage to leave the surface smooth and prepped for the Brown Rubber Wheel. Also, ideal for chairside adjustments.
Use a handpiece that can be regulated to 30,000 RPM or a lathe.
RPM= 30,000
Brown Rubber Points

4514-01, 4513-01 12 pcs
Ideal to eliminate scratches and smoothen the surface.
Use a handpiece that can be regulated to 30,000 RPM or a lathe.
RPM= 25,000 (do not press too hard, especially when using the buff for the first time).
Item Codes:
Small 4513-01 12 pcs.
Large 4514-01 12 pcs.
Carbide Burs

50251G-01
Specifically designed to cut thermoplastics. Long-lasting with high cutting efficiency.
Item Codes:50251G-01
Green Mounted Stones

4501-01 100/box
Used during the finishing stage. Cuts thermoplastics moderately, and leaves a smooth surface. Ideal for minor chairside adjustments.
Use a handpiece that can be regulated to 30,000 RPM or a lathe.
RPM= 30,000
Item Code: 4501-01 100/box.
How To: Tips & Techniques
How to avoid clogging when trimming an appliance
Purchase Pink Zirconia Burs! Grind and trim thermoplastics with ease; Pink Zirconia Burs will not clog material as it absorbs heat while in use.
The key to high shine appliances
Rubberizing an appliance is the key to achieving a high shine in the polishing stage. Use a Brown Rubber Wheel or a Brown Rubber Point to rubberize and seal the surface of the partial.
Shape your Wheels
Round the edges of Brown Rubber Wheels and Pink Grinding Wheels with a truing stone. Rounded edges help you maintain control and help you access hard to reach areas. It is wise to keep a variety of shaped wheels around your station to choose the best one for a particular area.